Very high energy efficiency complete air conditioning system

Octopus

Heating

The system heats the rooms ensuring maximum comfort starting from the cooling power of the outdoor unit that is carried out and stored by the indoor unit Thron.

Cooling

The system cools the environment and ensures maximum comfort thanks to the heat power of the external unit carried out and stored by the internal module of Thron.

Hot Water

Adaptable to any heat pump or boiler.

VMC Dual Flow

Built-in Octopus. The essential characteristics of a system of double flow is to drive new air to a temperature close to that of the indoor environment allowing energy savings in winter as in summer. The system uses the heat of the air extracted to heat the incoming fresh air. Its use provides a great economic benefit and is currently the ideal solution for those homes that require a high level of energy efficiency.

OCTOPUS product all in one!

Octopus is a heat recovery and an air treatment unit that allows you to heat, condition, dehumidify and renew the air of the whole building.

A solution that gathers in one unit, all the demands of a newly designed housing!

8

Octopus System functions

Heating

The system heats the rooms ensuring maximum comfort starting from the cooling power of the outdoor unit that is carried out and stored by the indoor unit Thron.

Cooling

The system cools the environment and ensures maximum comfort thanks to the heat power of the external unit carried out and stored by the internal module of Thron.

Hot Water

Adaptable to any heat pump or boiler.

VMC Dual Flow

RECOVERY EXHAUST AIR

Note that the stale air is always extracted from wet rooms like kitchen and bathroom, in this way the exhaust air is not extended throughout the house. The stale air is recovered, filtered out and passed through a heat exchanger where it gives its heat to the new air. In this process there is not air exchange, but heat exchange. The stale air is expelled outside after the process.

FRESH AIR INTAKE

The new incoming air is filtered in order to ensure an improvement of the health of the occupants.

CONTROL DUAL ZONE

The system manages two different zone temperatures, Day and Night independently, to offer maximum comfort. You can also put in function only one zone with the consequent energy savings.

DOMOTIC CONTROL

The Smart Home function can be integrated in the climate system, and thanks to a dedicated APP can control the system from any Smartphone or Tablet with both IOS and Android protocol.

The main components of the system

Octopus

Cooling/Heating/Energy Recovery/Filtration
EC motors for low consumption
10 independent ducts
Balanced heat distribution: each room/environment gets the needed thermic energy
Air distribution variable upon the need of each room /environment.
VMC system with crossed air flow granting 200m3/h of renovating air: Mold elimination
Replaceable air filters, with G3 and M5 efficiency class for optimal air quality in the rooms
Invisible ducts. Fast installation, antibacterial Sanitized certified, isolated, anti-condensation and anti-noise with very low air pressure loss
Simple installation (reduced mounting time compared to traditional ducts)
Very silent air flow in the ducts

Dual Zone

Dual Zone Independent Day & Night Control
2 independent thermostats
Selection of the room temperature
Mode: Heating/Cooling/Ventilation
3 speed LOW-MED-HIGH with AUTO/Manual control
On/Off Timer
Weekly program with 4 daily periods
Clock
It detects and displays the room temperature

Control system via Tablet or Smartphone

Domotic is a system that controls all the functions of the two thermostats
It incorporates an electronic control unit inside the inner module that communicates through a dedicated app with a Smartphone or Tablet, both with IOS or Android protocol
The devices become actual remote controls of the system
The PC board enables the management of other smart features that can be installed later on request and upon user’s needs